Tool Room

High Accuracy Tool Room Lathes

	The T.I.R of the spindle within 80 millionths or less
	Spindle speed to 3,000 RPM
	1 1/16" 5c thru-collet capacity
	11" swing, 18" center distance
	Inch thread range of 11 to 108
	Millimeter thread range of 0.275 to 2.7
	Inch and metric dials on carriage, cross slide, tool post slide, and tailstock
	Independent variable electric feeds
	Full-bearing carriage

	The T.I.R of the spindle within 80 millionths or less
	Spindle speed to 3,500 RPM
	1 1/16" 5c thru-collet capacity
	6-station turret
	Double tool cross slide
	The preload ball bearing turret eliminates all play between the turret head and turret slide.

	The T.I.R of the spindle within 80 millionths or less
	Spindle speed to 3,500 RPM
	1 1/6" 5c thru-collet capacity
	9" swing, 17" center distance
	Compound slide
	MT#2 tailstock

Fast lever collet chucking with a single movement.
Hardened and precision ground special alloy steel bed ways.
Push button control for variable speed drive.
Standard 5c collet closer.
Spindle is supported by 2 point preloaded precision angular contact ball bearings to absorb the radial and axial forces.
Exact variable spindle speed can be changed while tool is cutting.
Sliding ball bearing collet tray provides space for one set of collets and is within easy reach of operator.
Direct reading spindle speed indicator.
Welded steel pedestal with knee space.
Direct reading spindle speed indicator.
Automatic driveshaft spindle brake.
Magnetic electric control panel for low voltage protection. Machine controls operate at 110V. Time leg thermal overload relays provide overload protection.