 |
Web Hosting by Netfirms | Free Domain Names by Netfirms |
|
 |
|
|
Precision, Heavy Duty, Gap-Type Engine LathesMLA Series | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Auto one-shot lubrication system with adjustable volume knob for carriage and bed ways |
| Multi-position adjustable kick-out stops for auto feed |
| Solid one-piece, full-length casting base for maximum rigidity |
| Spindle jog button for easy gear changes |
| Wide hardened & ground bed ways |
| Safety foot brake, thread chasing dial |
| Heavily ribbed, closed grain solid bed |
| Hardened & ground gears and splines |
| Removable gap bed |
| 2-speed hi/low selectable tail stock manual feed traverse (MLA-x60 models only) |
|
Model: |
MLA-430 |
MLA-530 |
MLA-560 |
MLA-660 |
MLA-760 |
| Swing over bedway |
17 |
21 |
22 |
26 |
30 |
| Swing over cross slide |
10-3/4" |
14-2/3 |
13 |
17-1/2 |
22 |
| Swing over gap |
24 |
28 |
30-7/8 |
35-7/16 |
39-7/8 |
| Distance between centers |
32 to 67 |
60 to 240 |
|||
| Width of bed |
12 |
15-3/4 |
|||
| Spindle nose |
D1-6 |
D1-11 |
|||
| Spindle bore |
2-1/4" |
4-1/16" |
|||
| Spindle taper |
MT #6 |
MT #7 x #5 |
|||
| Spindle speeds (12 steps) |
35 - 2000 RPM |
13 - 1200 RPM |
|||
| Tailstock quill diameter |
2-3/8 |
2-15/16 |
|||
| Tailstock quill travel |
6 |
5 |
|||
| Tailstock taper |
MT #4 |
MT #5 |
|||
| Spindle motor |
5 HP (7.5 HP opt.) |
10 HP (15 HP opt.) |
|||
Find what you are looking for? If not, please contact us and see how we can help! |
