|
|
|
Variable High Speed, Heavy Duty Engine LathesDY Series | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Infinitely variable high speed spindle with 3 steps for maximum torque output |
| Headstock gears (made in Japan) are hardened & ground chrome-molybdenum alloy steel |
| High precision bearings support spindle on three points |
| Totally enclosed, oil bath lubricated, headstock and gearbox |
| Slideways coated with Turcite B to reduce friction and extend life |
| One piece machine base construction for rigidity during heavy cutting |
| Auto lubrication on longitudinal and cross slide ways |
| Cross feed screw is backlash adjusted to ensure feeding accuracy |
|
Model: |
DY-410VS |
DY-470VS |
DY-510VS |
| Swing over bedway |
16” |
18.5” |
20” |
| Swing over cross slide |
10.2” |
11.5” |
13” |
| Swing over gap |
27.5" |
29” |
32” |
| Distance between centers |
30” / 40” / 60” |
34” / 44” / 63” / 83” |
|
| Spindle bore |
2-1/8” |
3-1/8” |
|
| Spindle nose |
D1-6 |
D1-8 |
|
| Number of spindle speeds |
Variable (3 steps) |
||
| Spindle speeds |
20 - 3000 RPM |
30 - 2500 RPM |
|
| Bed width |
12” |
13” |
|
| Tailstock taper |
MT 4 |
MT 5 |
|
| Spindle motor |
7.5 HP |
10 HP |
|
| Motor drive system |
Inverter |
||
| Machine weight |
3600 lbs. |
4200 lbs. |
|
Find what you are looking for? If not, please contact us and see how we can help! |
