 |
Web Hosting by Netfirms | Free Domain Names by Netfirms |
|
 |
|
|
Heavy Duty, Universal, Gap-Type Engine LathesCYPML Series | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 4-1/8” Spindle Bore |
| Three-point, rigid spindle system with 15HP motor |
| Induction hardened & precision ground bedways |
| 4-way rapid traverse for longitudinal & cross |
| Hardened and ground gears |
| Wide range of threading with no gear changes required |
| Feed overload protection mechanism and foot brake for emergency stop |
| Clutch design maintained for spindle forward/reverse rotation |
|
Model: |
CYPML20G |
CYPML26G |
| Swing over bedway |
20” |
26” |
| Swing over cross slide |
12" |
16 1/2” |
| Swing over gap |
28” |
34” |
| Distance between centers |
80” |
120” |
| Width of bed |
15-1/2” |
|
| Spindle nose |
D1-8 |
|
| Spindle bore |
4-1/8" |
|
| Spindle taper |
MT #5 |
|
| Spindle speeds (24 steps) |
6 - 1120 RPM |
|
| Tailstock quill diameter |
2-3/8” |
|
| Tailstock quill travel |
6” |
|
| Tailstock taper |
MT #5 |
|
| Spindle motor |
15 HP |
|
Find what you are looking for? If not, please contact us and see how we can help! |
